Home » New Machinery » Mowers » Kverneland Taarup 3132 MT
Kverneland Taarup 3132 MT

Kverneland Taarup 3132 MT

Centre Mounted Mower Conditioner

The 3132 MT is a real contractor solution with its 3.2m working width, and is the ideal mower to operate in combination with a front mounted mower, for a substantial working width of 6.2m at low operating costs.

The Advantages:

Centre Mounted Suspension
Hydraulic setting of ground pressure.
3.2m working width
SemiSwing Steel Tine Conditioning
Available with FlipOver wide spreading kit.
Kverneland Taarup BreakBack System

Cutterbar with Round Discs

Kverneland Taarup uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.
The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
The fully welded cutterbar gives a very stiff and strong design for high durability.

HydroFloat Hydraulic Suspension

The 2500 H and 3132 MT are designed with a hydraulic suspension system, allowing easy setting of ground pressure, to adapt to varying field conditions. This provides the best conditions, for an even cutting height and maximum protection of the stubble. The result is better forage quality, less wear on the mower and reduced fuel consumption.
The ground pressure can be continuously and quickly adjusted from the tractor seat, even while operating. All you need to do, is to activate the hydraulic outlet.

Centre Suspension

The centre pivot suspension provides an even weight distribution of the 2500 H, 2836 M, 3224 MT, 3228 MT and 3132 MT and a uniform ground pressure over the complete working width, ensuring good ground contour following.
The mowing units are suspended in the centre of gravity. This design provides a constant, faster and more precise adaptation to ground contours.
The benefit is less skid wear, optimum protection of the stubble and less fuel consumption.

BreakBack

To offer maximum protection of the cutterbar, these machines are fitted with the well-known Kverneland Taarup BreakBack solution.
When encountering an obstacle, the BreakBack will swing the machine backwards and over the obstacle, returning it to the original working position once the obstacle has been passed

Mid-Louth Garage Ltd.
Unit 7, Ashbourne Industrial Estate, Ashbourne, Meath, Ireland
Old Railway Station, Ardee, Louth, Ireland
   Phone: 041 685 3356 | 01 9690099 | E-mail: [email protected]
Copyright © 2019 Mid-Louth Garage Ltd.