Kverneland Taarup 3224 MN – 3228 MN - 3232 MN

Kverneland Taarup 3224 MN – 3228 MN - 3232 MN

Centre Mounted Mower Condtioners

Kverneland Taarup offers three centre mounted mower conditioners, 3224 MN, 3228 MN and 3232 MN, in working widths between 2.4 and 3.2m. Due to the nylon tines fitted to the conditioner, the total weight of the machine is kept to a minimum, while keeping an aggressive conditioning.

The Advantages:

Centre Mounted Spring Suspension
2.4, 2.8 and 3.2m working width
Nylon Tine Conditioning
Vertical Transport Solution
600/900 rpm Conditioner Rotor
Kverneland Taarup NonStop BreakBack System

Cutterbar with Round Discs

Kverneland Taarup uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.
The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
The fully welded cutterbar gives a very stiff and strong design for high durability.

125° Vertical Transport Position

The mower is folded into a 125° vertical transport position using a hydraulic cylinder.
The low gravity point during transport, with the weight of the mower close to the tractor, provides an excellent weight distribution.
The tractor and mower remains well balanced, even during high speed road transport, and the machine is fixed during transport by the hydraulic lifting arm.
In addition transport height is limited, so passing through narrow gateways or under bridges is not a problem.
Another benefit is that the hydraulic cylinder also supports quick lifting of the mower from working to headland position.

Centre Suspension

The centre pivot suspension provides an even weight distribution of the 2500 H, 2836 M, 3224 MT, 3228 MT and 3132 MT and a uniform ground pressure over the complete working width, ensuring good ground contour following.
The mowing units are suspended in the centre of gravity. This design provides a constant, faster and more precise adaptation to ground contours.
The benefit is less skid wear, optimum protection of the stubble and less fuel consumption.

Adjustable Gearbox Speed

The machines also offer a large degree of operating adaptability, as they are factory fitted with the option of being operated with either 540 or 1000 rpm.
It requires no additional accessory. All that is needed is simply to turn the main gearbox on the suspension 180°. 

BreakBack

To offer maximum protection of the cutterbar, these machines are fitted with the well-known Kverneland Taarup BreakBack solution.
When encountering an obstacle, the BreakBack will swing the machine backwards and over the obstacle, returning it to the original working position once the obstacle has been passed

Nylon Tine Conditioning

Due to the nylon tines fitted to the conditioner, the total weight of the machine is kept to a minimum, while keeping an aggressive conditioning.
The fixed conditioning fingers are made from high quality nylon, to make them very rigid.
This means excellent protection from stones and other obstacles. A perfect solution for farmer and smaller contractor machines!